1. Paslanmayan Polad Sabit Kürə Vana tətbiqi
Üzən kürə klapanı ilə müqayisədə, topun üzərindəki valfın önündəki maye təzyiqindən yaranan güc hamısı rulmana ötürülür, beləliklə top valf oturacağına keçməyəcək, buna görə də valf oturacağı çox təzyiq göstərməyəcəkdir ;
Bundan əlavə, Paslanmayan poladdan sabitlənmiş kürə valfi kiçik tork, vana oturacağının kiçik deformasiyası, sabit sızdırmazlıq performansı və yüksək təzyiq və böyük diametrli tətbiqlərə uyğun uzun ömürlüdür.
2. Xüsusi parametrləriPaslanmayan Polad Sabit kürsülü
Məhsulun adı |
Paslanmayan Polad Sabit kürsülü |
||
DN |
DN50~DN1200 |
Bağlantı növü |
Flanşlı |
PN(MPaï¼ ‰ |
1.6Mpa~42.0Mpa |
Aktuator növü |
Əl ilə sürücü, Pnevmatik, Hidrolik və ya elektrikli Aktuator |
Dizayn Temperatur Aralığı |
-20~ + 100â „ƒï½ž + 450â„ ƒ |
Standart |
GBã € DINã € APIã € ANSI |
Bədən |
PaslanmazPolad |
Tətbiq olunan orta |
Su, neft, qaz və müxtəlif korroziya mühiti |
3.XüsusiyyətləriPaslanmayan Polad Sabit kürsülü
1) Paslanmaz steel fixed ball valve has two-piece and three piece valve body structures. The middle flange is connected by bolts, and the seal is made of reinforced polytetrafluoroethylene inlaid into the stainless steel ring. There is no spring at the back of the steel ring to ensure that the valve seat is close to the ball and keep the seal.
2) There is no PTFE bearing on the upper and lower valve stems of the Paslanmaz steel fixed ball valve, which reduces friction and saves labor. There is no adjusting plate at the bottom of the small shaft to ensure the joint position between the ball and the sealing ring. Full bore design for pipeline cleaning.
3) Paslanmaz steel fixed ball valve automatic pressure relief function: when the stagnant medium pressure in the valve cavity rises abnormally and exceeds the preload of the spring, the valve seat will retreat from the ball to achieve the effect of automatic pressure relief, and the valve seat will reset automatically after pressure relief.
4) Paslanmaz steel fixed ball valvedrain pipeline: the drain valve L is set up above and below the valve body to check whether the valve seat leaks. During operation, when the valve is fully open or closed, the pressure in the middle chamber can be removed and the packing can be directly replaced; Can be discharged in the cavity retention, reduce the pollution of the medium to the valve. Auxiliary seal setting system;
4. Texniki spesifikasiyaof Paslanmayan Polad Sabit kürsülü
Dizayn əsası |
Milli standart |
Amerika standartı |
||
Dizayn meyarları |
GB / T12237 |
AP16D |
ANSI B16.34 |
|
Flanş bağlantı quruluşunun uzunluğu |
GB / T12221 |
AP16D |
ANSI B16.10 |
|
Struktur uzunluğu (qaynaq) |
GB / T15188.1 |
AP16D |
ANSI B16.10 |
|
Bağlayıcı flanş |
GB / T9113 |
ANSI B16.5ã € B16.47 |
||
JB / T79 HG20592 |
||||
Qana uc |
GB / T12224 |
ANSI B16.25 |
||
Test və yoxlama |
GB / T9092 |
AP16D |
AP1598 |
5. tətbiqi Paslanmayan Polad Sabit kürsülü
Paslanmaz steel fixed ball valve is widely used to cut off or circulate the medium in the transportation pipeline of food, medicine, petroleum, chemical industry, natural gas, steel, environmental protection, papermaking, etc.
6. MST haqqında
7. Bizimlə əlaqə qurmağa xoş gəlmisiniz
ranee@milestonevalve.com
Hüceyrə: +86 15033798686
8. Suallar